Hardwood Floor Refinishing and Installation in Sandy Springs, GA
Hardwood Floors for Homes and Condominiums
TriArt Hardwoods refinishes, installs and repairs hardwood floors and stairs in homes across Sandy Springs, whether you live in a house, a townhome or a condo. In condo buildings, we also coordinate with management and follow the building's requirements.
Get Help With Your Floors in Sandy Springs
Hardwood Floor Refinishing in Sandy Springs
Refinishing your floors
We check the floor's condition, take it back to bare wood, sample stain on your floor and finish it in three coats. In a condo, we also handle the building approvals, elevator scheduling and common-area protection, rather than leaving them to you.
Your options
- Screen and recoat: a fresh coat over the old finish, for floors that are dull but not scratched into the wood. Keeps your color and takes a day or two. Priced at the walkthrough.
- Full refinish: sanded to bare wood, stained and finished in three coats, for gray paths, deep scratches, stains or a new color. $2.75 to $5.00 per sq ft.
- Low-odor finishes: water-based finishes have little odor; oil-based has more. We'll tell you which we're using and why.
How it works
- We visit, check the floor and how much wood is left, and leave a written price. In a condo, we confirm the building's rules first.
- You choose a color at our Alpharetta showroom on Hembree Road, and we test your top picks on your own floor.
- We sand with dust containment that vents outside, working in zones so you can stay home.
- The work takes three to five days. Furniture goes back 48 to 72 hours after the last coat.
Hardwood Floor Installation in Sandy Springs
New floors for houses and condos
Whether you live in a house, townhome or condo, we install new floors that fit your home. In condo buildings, we also handle the paperwork and follow the building's rules. Many condo buildings require a sound-rated underlayment under new floors, and they check it before approval. We install to the association's stated rating and provide the documentation it needs. Hardwood installation starts at $2.50 per sq ft.
Your options
- Engineered hardwood over acoustic underlayment: meets most building specs and suits concrete construction.
- Solid hardwood: for houses with upper floors over a wood subfloor. It lasts the longest and can be refinished for decades.
- Matching your existing floors: new boards matched in species and width, woven in at the doorways and finished with the old floor so the color matches.
- Wide plank and patterns: white oak, red oak, herringbone, chevron and inlays, prefinished or finished on site.
- Luxury vinyl plank: for basements and rooms that have taken water before. Starting at $1.50 per sq ft.
Building rules, handled
- We confirm the building's flooring requirements before we quote.
- We provide the underlayment paperwork the association asks for.
- Coordination time for approvals, elevator scheduling and common-area protection shows as its own line on the quote, not hidden in the square-foot rate.
How it works
- We measure, test for moisture and, in condos, review the building's flooring requirements. Then we leave a written, line-item price.
- A 50% deposit orders your wood and holds your dates. We schedule the work, including building hours and elevators when you're in a condo. The wood settles in your home before we install.
- We remove and haul away the old floor, fix the subfloor where needed, and install.
- We finish the floor if it's finished on site, then walk it with you.
Hardwood Floor Repair in Sandy Springs
Repairs that blend in
Water can come from a dishwasher, a refrigerator line or, in a condo, the unit above. We document the damage before work starts, which helps with the association and an insurance claim. Repairs are priced at the walkthrough.
What we fix
- Boards darkened or cupped by a leak from above
- Water damage from a dishwasher or refrigerator line
- Pet stains and deep gouges
- Loose, squeaky or soft spots
How it works
- Send photos for a first opinion. Then we document the damage and check what's under the boards in person.
- We dry and check the subfloor, then replace the damaged boards with matching wood.
- When the product on your floor is discontinued, refinishing the room lets old and new boards finish to one color. If the subfloor is damaged, our general contractor license (RBCO008240) covers that too.
Hardwood Stairs and Treads in Sandy Springs
Stairs that match your floors
Stairs are one of the most visible parts of any home. We stain treads from the same batch as your floors, so the stairs match the floors at the top and bottom. Stair work is priced at the walkthrough and can be added to any refinish or installation.
Your options
- Carpet to hardwood: new hardwood treads and risers in place of carpet.
- Refinish with your floors: existing treads sanded and stained along with the floors.
- Open and floating stairs: hardwood treads installed on modern staircases.
Hardwood Floor Projects
Photographed on our jobs
What to Expect During Your Floor Project
Before you book
Do we have to leave the house?
Usually not. We work in zones so a bedroom, a bathroom and an exit stay reachable, and most families stay home. Pets need to be out of the work area while finish is going down.
How much dust and odor should we expect?
Dust is captured at the sander and vented outside. Edge and detail work still create a little dust, so we protect the rooms nearby. Water-based finishes have little odor; oil-based has more. We'll tell you which we're using and why.
How long until we can use the floor?
Most refinishes take three to five days, plus a day if you're changing the stain color. Furniture goes back 48 to 72 hours after the final coat. Your written schedule shows the dates room by room.
Who moves the furniture?
We'll go over what needs to be cleared and what our team handles before work starts, so the rooms are ready on day one.
What's in the written price?
We measure in your home and leave a written price before we go. Repairs, stain, stairs and removal are listed as separate lines, so you can compare quotes line for line. There's no deposit at the estimate. Once you accept, a 50% deposit orders material and holds your dates.
What does the warranty cover?
Every installation, refinish and repair carries a lifetime labor warranty, written into your quote. As a licensed Georgia general contractor (RBCO008240), we can also handle anything we find under the floor.
Reviews From Condo and Home Owners
In their words
Questions From Homeowners in Sandy Springs
Before you call
What does refinishing cost in a Sandy Springs house, townhome or condo?
For a house, townhome or condo in Sandy Springs, a full refinish runs $2.75 to $5.00 per square foot. Board repairs, stain changes and stairs move the number, and a screen and recoat costs less. We leave a written price after a free visit.
Does underlayment change the cost of new hardwood in Sandy Springs?
It can. Hardwood installation starts at $2.50 per square foot, and underlayment is one of the lines on your quote, along with species, board width and subfloor work. Many condo buildings require a sound-rated underlayment.
Is condo work more expensive than a house?
The flooring itself is priced the same, $2.75 to $5.00 per square foot for standard sand-and-finish. Condo projects carry additional coordination time for building approvals, elevator scheduling, and common-area protection, and that shows as a separate line in the written quote rather than being buried in the square-foot rate.
Can you meet my building's sound underlayment requirement?
Yes. We install to the association's stated rating and provide the documentation it needs for approval. Engineered hardwood over acoustic underlayment meets most specs.
Who handles the building approvals?
We do. We confirm the building's requirements before quoting, and we handle the coordination for approvals, elevator scheduling and common-area protection.
A leak from the unit above damaged my floor. What happens next?
We document the damage before work starts, which helps with the association and an insurance claim. Then we dry and check the subfloor and replace the boards with matching ones.