Hardwood Floor Refinishing and Installation in Decatur, GA
One Floor After the Renovation
Took out a wall or opened up the kitchen? TriArt laces new boards into original floors across Decatur and refinishes the room so the line where the wall stood disappears.
Not sure what your floors need?
Hardwood Floor Repair in Decatur
Walls out, one floor
Taking out a wall leaves a strip of bare subfloor where it stood, and often a change of direction or species between the old rooms. The fix is lacing: removing boards at staggered lengths along the gap, weaving in new ones so there's no straight seam, then refinishing the whole area together.
The new boards have to match the species and width, and older floors are sometimes a width that's no longer standard. We source the closest match and show it to you before work starts.
Hardwood Floor Refinishing in Decatur
Original oak, sampled first
Original floors in older houses are usually oak that has been sanded only once or twice, so there's often plenty left. We check the remaining thickness, sand in three grits to bare wood, hand-work the edges, sample stain on your own floor and finish in three coats.
Hardwood Floor Installation in Decatur
The floor goes in last
When the floor is part of a bigger remodel, sequencing decides how it turns out. Walls, framing and drywall come first, and the floor is installed and finished last so nothing lands on new finish. TriArt is a licensed general contractor (RBCO008240), so the remodel and the floor can run as one job.
Hardwood Floor Projects
Photographed on our jobs
What to Expect During Your Floor Project
Before you book
Do we have to leave the house?
Usually not. We work in zones so a bedroom, a bathroom and an exit stay reachable, and most families stay home. Pets need to be out of the work area while finish is going down.
How much dust and smell?
Dust is captured at the sander and vented outside. Edge and hand work still make some, so it isn't dust-free, and we won't say it is. Water-based finishes have little odor; oil-based has more. We'll tell you which we're using and why.
How long until we can use the floor?
Most refinishes take three to five days, plus a day if you're changing the stain color. Furniture goes back 48 to 72 hours after the final coat. Your written schedule shows the dates room by room.
Who moves the furniture?
What’s in the written price?
We measure in your home and leave a written price before we go. Repairs, stain, stairs and removal are listed as separate lines, so you can compare quotes line for line. There's no deposit at the estimate. Once you accept, a 50% deposit orders material and holds your dates.
What if something goes wrong?
Our labor carries a lifetime warranty, in writing on the warranty page. We're insured and a licensed Georgia general contractor (RBCO008240), so a problem under the floor doesn't stop at the flooring.
What Homeowners Say About TriArt
In their words
Questions Roswell Homeowners Ask
Before you call
Should the floor be done before or after the kitchen?
After. Cabinets and appliances go in on the subfloor or over finished wood, depending on the plan, but the final sanding and finish go on last so they aren't damaged. We'll set the order at the walkthrough.
Is my floor oak or heart pine?
Heart pine has a tight, amber-to-red grain and dents more easily. Oak has a more open grain and is harder. It changes how we stain and finish, so we identify it at the walkthrough. Heart pine usually looks best in a clear finish.
What if my boards are a width you can't buy anymore?
We source the closest match and show it to you before work starts.
How much does it cost to refinish hardwood floors in Decatur?
A full sand and refinish runs $2.75 to $5.00 per square foot. Lacing, repairs and stain changes are listed separately in the written price.