Hardwood Floor Refinishing and Installation in Canton, GA
Beyond Builder-Grade
Hardwood in the foyer, carpet everywhere else? TriArt carries the builder's hardwood through the rest of the house in Canton and finishes old and new boards together so it reads as one floor.
Get Help With Your Floors in Canton
Hardwood Floor Installation in Canton
One floor, not two
When owners upgrade a builder-grade house, the goal is usually wood through the whole main level, with old and new boards looking like one floor. If the existing hardwood is solid, we weave new boards into it at the old transitions instead of butting them against it, then refinish everything together.
If the builder's floor is an engineered product that can't be matched, new flooring across the level is often the cleaner answer. We price both at the walkthrough so you can compare. Above grade over a wood subfloor, solid hardwood is the right product. On a slab or in a basement, engineered is. The subfloor is checked and leveled first, and removal and haul-away are included.
Hardwood Floor Refinishing in Canton
The builder’s floor, refinished with the new
Builder floors are usually red or white oak on their first sand, with plenty of wood left. Sanding the original floor and the new boards in one sequence, with one stain batch, is what makes them match. It's also the time to drop a builder stain you never picked, because a full sand takes the floor back to bare wood.
Hardwood Floor Repair in Canton
Kitchen, laundry and back door
Builder floors usually have one weak spot: the boards in front of the sink, the dishwasher or the laundry door, where water has darkened or lifted them. We fix the source, check the subfloor, replace the damaged boards with matching oak and refinish them with the rest of the floor.
Hardwood Floor Projects
Photographed on our jobs
What to Expect During Your Floor Project
Before you book
Do we have to leave the house?
Usually not. We work in zones so a bedroom, a bathroom and an exit stay reachable, and most families stay home. Pets need to be out of the work area while finish is going down.
How much dust and smell?
Dust is captured at the sander and vented outside. Edge and hand work still make some, so it isn't dust-free, and we won't say it is. Water-based finishes have little odor; oil-based has more. We'll tell you which we're using and why.
How long until we can use the floor?
Most refinishes take three to five days, plus a day if you're changing the stain color. Furniture goes back 48 to 72 hours after the final coat. Your written schedule shows the dates room by room.
Who moves the furniture?
What’s in the written price?
We measure in your home and leave a written price before we go. Repairs, stain, stairs and removal are listed as separate lines, so you can compare quotes line for line. There's no deposit at the estimate. Once you accept, a 50% deposit orders material and holds your dates.
What if something goes wrong?
Our labor carries a lifetime warranty, in writing on the warranty page. We're insured and a licensed Georgia general contractor (RBCO008240), so a problem under the floor doesn't stop at the flooring.
What Homeowners Say About TriArt
In their words
Questions Roswell Homeowners Ask
Before you call
Should I choose solid or engineered hardwood?
Solid above grade over a wood subfloor, engineered on a slab or in a basement. Solid can be refinished more times. Engineered handles moisture movement better. See solid vs. engineered hardwood.
How much does new hardwood cost?
The material drives the price more than the labor. Red oak strip and wide-plank white oak are different projects at different numbers. Your written quote lists material and labor separately. Our installation cost guide explains what moves it.
How long does installation take?
Most main levels take three to five days, depending on square footage and how much leveling the subfloor needs.
Do you remove the carpet?
Yes. Carpet, pad, tack strip and staples come out, and removal and haul-away are in the quote.